Roland VIMA JM-8 Owner'S Manual Download

Page: 19 / 176

Adjusting the volume

VIMA JM-8

Turning the power off

(1) Turn the [MASTER VOL] knob all the way to the left

to minimize the volume.

Note:

Never switch off the JM-8 while playback or record-

ing is running or while data are being read from, or written
to, the hard disk.

(2) Switch off your external amplification system.

(3) Press the JM-8’s [POWER] switch.

The display will go dark and the power will turn off.

Note:

If you need to turn off the power completely, first

turn off the [POWER] switch, then unplug the power cord
from the power outlet. Refer to “Connecting the AC
adapter” on p. 18.

Adjusting the volume

Here’s how to adjust the volume of the JM-8.

(1) Start playback of the demo songs by pressing the

[VIDEO CONTROL] and [EXIT] buttons (see p. 20).

(2) Turn the [MASTER VOL] knob to adjust the overall

volume.

Listening through headphones

You can use headphones to enjoy the JM-8 without dis-
turbing those around you, such as at night.

(1) Plug the headphones into the PHONES socket

located on the JM-8’s left side panel.

If you don’t want to disturb others, switch off the
external amplification system, because the JM-8’s
AUDIO outputs remain active even when you connect
headphones.

(2) Use the JM-8’s [MASTER VOL] knob to adjust the

headphone volume.

■

Cautions when using headphones

• To prevent damage to the cord’s internal conductors,

avoid rough handling. When using headphones,
mainly try to handle either the plug or the headset.

• Your headphones may be damaged if the volume of a

device is already turned up when you plug them in.
Minimize the volume before you plug in the head-
phones.

• Excessive input will not only damage your hearing,

but may also strain the headphones. Please enjoy
music at an appropriate volume.

• Use headphones that have a stereo 1/4” phone plug.

MASTER VOL

POWER

Upper position

Off

MASTER VOL

Headphones

JM-8_OM_GB.book Page 19 Wednesday, July 29, 2009 4:43 PM

Summary of Contents for VIMA JM-8

















































































































































































Search results

Summary of Contents for VIMA JM-8

Reviews:

Related manuals for VIMA JM-8

Brands by name

Popular brands

Roland VIMA JM-8, Owner'S Manual

Search results

Summary of Contents for VIMA JM-8

Reviews:

Related manuals for VIMA JM-8

Brands by name

Popular brands