33
Other Features
Formatting USB Flash Drives
When you’re using a USB flash drive for the first time, it must first be
formatted on the V-800HD MK II.
NOTE
5
The V-800HD MK II does not recognize unformatted USB flash
drives.
5
Operation has been tested for commonly available USB memory
devices, but operation of all USB memory devices is not assured.
Depending on the manufacturer and type of the USB memory
device, correct operation may not be possible.
5
Performing formatting causes all data already saved on the USB
flash drive to be deleted. If the flash drive contains necessary data,
back it up onto a computer or elsewhere before formatting the
drive.
5
Depending on the USB flash drive, recognition of the flash drive
might take some time.
Making the Connection
1.
Open the sliding cover on the USB MEMORY port and
connect the flash drive to the port.
* Be careful to orient the USB memory device correctly front and back
and in the correct direction for insertion, and insert it firmly, as far
as it will go. Never insert using undue force.
* When the USB MEMORY port is not in use, be sure to keep the
sliding cover closed to protect the connector.
Performing Formatting
1.
Select the [MENU] button
g
“System”
g
for USB Memory,
select “Format,” then press the [ENTER] button.
2.
When the message “Push ENTER to execute.” appears, press
the [ENTER] button.
(If you want to cancel the operation, press the [EXIT] button.)
Formatting of the USB flash drive is carried out.
3.
Press the [MENU] button to quit the menu.
Changing Cross-point Assignments
You can change the channels assigned to the cross-point [1] through
[10] buttons.
You can also disable operation of a cross-point button by assigning no
channel to the button.
1.
Select the [MENU] button
g
“System”
g
“Cross-point
Assign,” then press the [ENTER] button.
The System
A
Cross-point Assign screen is displayed.
2.
Select cross-point cross point (from 1 to 10), then use the
[VALUE] knob to specify the channel number (Ch. 1 to 10) to
assign to the cross point.
* To assign no channel, specify “None.”
3.
Press the [MENU] button to quit the menu.
Returning Settings to the Factory-
default State (Factory Reset)
You can return the values of settings on the V-800HD MK II to their
factory defaults.
If operation that differs from what is described in the owner’s manual
occurs even when the steps described are followed correctly, try
performing a factory reset.
NOTE
Executing a factory reset causes all values that have been set,
settings saved in memories (p. 31), and still images saved in the
unit to be lost.
1.
Select the [MENU] button
g
“System”
g
“Factory Reset,”
then press the [ENTER] button.
2.
When the message “Push ENTER to execute.” appears, press
the [ENTER] button.
(If you want to cancel the operation, press the [EXIT] button.)
A factory reset is executed.
3.
Press the [MENU] button to quit the menu.
