17
Video Input/Output Settings
Changing the Output Bus
The V-800HD MK II has three internal buses (PGM, PVW, and AUX). For each individual output connector, you can select which bus to output.
NOTE
Sending video on an input channel to the AUX bus makes DSK (p. 30) unusable.
Specifying a Signal to Send to the AUX Bus
1.
Select the [MENU] button
g
“Output”
g
“AUX Source.”
2.
Use the [VALUE] knob to specify the signal to send to the
AUX bus.
Value
Explanation
Mixer Input
1
These send signal
1
through
5
in the flowchart
below to the AUX bus.
When set to “Input Ch. 1–10”
5
You can use the AUX [1] through [10] buttons to
select “Input Ch. 1–10” settings directly.
5
DSK (p. 30) becomes unusable.
Mixer Output
2
DSK Source
3
DSK Output
4
Input Ch.1–10
5
Key Source
Channel
1
3
Mixer Input
Mixer Output
DSK Source
DSK Output
1
2
3
4
Input Ch.1–10
5
INPUT
OUTPUT
Ouput Fade
Selector
DSK Mixer
Video Mixer/PinP/Key
Still Image Still Image
Background
1
2
3
4
5
6
7
8
9
10
5
5
5
5
5
5
5
5
5
5
Frame Synchronizer/Scaller/Color Correct
Color Correct
2
4
Cross-point
PVW PGM
AUX
AUX Source
3.
Press the [MENU] button to quit the menu.
Assigning a Bus to an Output Connector
1.
Select the [MENU] button
g
“Output”
g
Source Assign to
select the output connector whose bus assignment you
want to change.
Menu item
Explanation
Source Assign
You use the items below to select the connector
whose bus assignment you want to set.
SDI 1
SDI OUT 1 connector
SDI 2
SDI OUT 2 connector
DVI-D/HDMI 1
DVI-D/HDMI OUT 1 connector
DVI-D/HDMI 2
DVI-D/HDMI OUT 2 connector
RGB/Component
RGB/COMPONENT OUT connector
SD OUT connector (*1)
Composite
HDMI
The output of the HDMI OUT connector is fixed
and cannot be changed.
(*1) “RGB/Component” and “Composite” become shared settings. Making
settings for separate buses us not possible.
2.
Use the [VALUE] knob to select “PGM,” “PVW,” or “AUX” and
set the assigned bus.
3.
Press the [MENU] button to quit the menu.
