31
Other Features
Saving/Recalling Settings (Memory)
You can save video settings, the state of the operation panel, and other current settings in memory and call them up for use when needed.
The V-800HD MK II has 8 internal banks for saving settings in memory. You can save settings in 8 memories in each bank, letting you use up to 64
memories for saving.
About the Last Memory Function
When you use the Last Memory function, the current settings are automatically saved in memory 1 of bank 1 when you exit a menu or recall a
memory. To use the Last Memory function, go to the System menu and set “Auto Memory” to “ON.”
Saving a Memory
NOTE
5
When the System menu item “Memory Protect” is set to “ON,”
settings cannot be saved to a memory.
5
When memory 1-1 has been selected as a destination for saving,
the values saved there might be overwritten by the Last Memory
function.
1.
Press the [STORE] button to enable saving settings to a
memory.
The currently selected MEMORY button flashes.
2.
Press the [BANK] button, then press the MEMORY button for
the bank number where you want to save the settings.
The bank changes.
While the [BANK] button is lighted, the button for the currently
selected bank number lights up.
3.
Press the MEMORY button for the number whose setting
you want to save.
The current settings are saved.
MEMO
The state of the [OUTPUT FADE] button on the operation panel is
not saved in memory.
The following settings are also not saved in memory. Only a single
set is saved in the unit.
Menu
Setting items saved in the unit
System
All menu items except “Status” of detailed settings for
“MIDI” and “Test Pattern”
* “Status” of detailed settings for “MIDI” and “Test Pattern” are always set to
defaults at startup.
Recalling a Memory
The settings in memory 1-1 are always loaded at startup of the
V-800HD MK II.
1.
Press the [BANK] button, then press the MEMORY button for
the bank number whose settings you want to recall.
The bank changes.
While the [BANK] button is lighted, the button for the currently
selected bank number lights up.
2.
Press the MEMORY button for the number whose setting
you want to recall.
The settings are recalled.
MEMO
You can automatically apply an output fade when a memory
is recalled. When a memory is recalled and the settings are
switched, the output fade is canceled.
[MENU] button
g
“System”
g
“Memory Switch Fade” to set the
value “ON.”
