13
Panel Descriptions
15.MIC (Microphone) Button
Starts recording with a microphone. A dialog box appears
and guides you through the procedure.
16.MIX DOWN Button
Starts mix-down. A dialog box appears and guides you
through the procedure.
17.WINDOW Button
Switches the top window displayed with the sequencer
program.
18.MENU Button
Displays the menu for the sequencer program.
* Cubasis VST U-8 does not use this button.
19.SELECT Button
This selects the target of an operation according to
circumstances with the sequencer program.
20.COMMAND Button
This calls up editing commands or the like according to
circumstances with the sequencer program.
* Cubasis VST U-8 does not use this button.
21.LOOP Button
When the button has been pressed and the LED is lit up, this
performs loop playback or recording in a range specified by
Locate points.
22.AUTO PUNCH Button
When the button has been pressed and the LED is lit up, this
performs auto punch in/out or recording in a range
specified by Locate points.
23.SHIFT Button
After pressing this button to light it up, activates the other
button’s alternate function.
24.Locator [1] Button (PREV)
This moves the song position to Locate point [1].
When pressed at the same time with the
Locator Set
button, it sets Locate point [1].
What Is a
Locator
?
This is a feature for remembering a song position. For
details, see the manual of the sequencer program.
25.Locator [2] Button (NEXT)
This moves the song position to Locate point [2].
When pressed at the same time with the
Locator Set
button, it sets Locate point [2].
26.Locator Set Button (TAP)
Pressing the
Locator [1] or [2]
button while holding down
this button sets the present song position as the
corresponding Locate point.
27.MIXER Button
Displays the Mixer Control screen.
28.EFFECTS Button
Displays the Effects Edit screen.
29.EFFECTS/MIXER CONTROL 1 to 4 Knobs
When the Effects Edit or Mixer Control screen has been
displayed by pressing the EFFECTS or MIXER button, these
controls change the values of the parameters assigned to
each one.
30.Input A Peak Indicator
Lights up when the signal from A input or Mic input is too
high.
31.Input B Peak Indicator
Lights up when the signal from B input or Guitar input is
too high.
32.Input A Sensitivity Volume Knob
This adjusts the signal level for A input or Mic input.
33.Input B Sensitivity Volume Knob
This adjusts the signal level for B input or Guitar input.
How to Adjust the Input A/B Level
For instructions on adjusting the Input A/B levels, refer
to
“How to Match the Input Levels”
(p. 66).
34.Track Status Buttons
Change the status of the tracks (play, mute, or the like).
35.Track Volume Faders
Set the volume for tracks.
36.REC (Record) MONITOR Button
Switches the Record monitor (the sound output during
recording). When lighted, only the sound being recorded is
output. When dark, all sound is output.
37.Master Volume Fader
Adjusts the overall volume level.
38.Track Group Indicators
These show the present assignments of the
Track Volume
faders
and the
Track Status buttons
.
39.Track Group Select Button
Used to select the Track Groups assigned to the
Track
Volume faders
and the
Track Status buttons
.
40.Headphones Volume Knob
Adjusts the volume level of the output from the headphones
jack. Turn it counterclockwise to lower the volume, or
clockwise to raise it.
