22
Getting Ready to Use the U-8
■
Getting Ready to Use the U-8 with a Computer
(Installing the U-8 Driver)
1
After completing the connections between the U-8 and your computer and
peripheral devices (p. 15), turn on your computer and start up Windows,
and then turn on the U-8.
Windows will automatically search for unknown devices, and the following
dialog box will appear.
fig.05-01.e.eps_50
* If the display indicates
Unknown Device
instead of
USB Composite Device
,
the installation procedure cannot be continued, so click
Cancel
to terminate the
installation procedure.
Afterwards, while referring to “
If Installation Doesn’t Proceed As It
Should, Check the Following Points
” (p. 24), proceed to check the status
of your computer.
2
Insert the included CD-ROM into your CD-ROM drive, and click
Next
.
3
Select
Display a list of all the drivers in a specific location, so you can
select the driver you want
, and click
Next
.
fig.05-02.e.eps_50
If the U-8 driver is already
installed in the computer
that you are using, delete
the previously installed U-8
driver before performing
the installation. For details
on deleting the U-8 driver,
refer to “
The U-8 Driver
”
(p. 67).
