59
Creating Songs with the U-8 and Cubasis VST
4
To record the effect-applied sounds without using the EZ RECORDING
function, specify the Input source to
MIC/A
and put on the
INSERT
button
on the
INPUT INST
track. Press the
INST
button in the
RECORD
section,
then record the sounds.
Finishing Up the Song
This outline explains how to get a final mixdown of the song, and then
record the song to an external tape recorder, MD, or other device.
■
Step 4: Press the MIX DOWN Button and Mix the Song
While Adding System Effects
When the U-8’s
MIX DOWN Button
is pressed, a wizard guides you through
the preparations for mixdown.
The following preparations for mixdown are made when the U-8 Mixer is
used.
1
Pressing the
MIX DOWN
button on the U-8 displays the
EZ-
RECORDING [Mixdown] Effect Setting
dialog box.
2
At the
EZ-RECORDING [Mixdown] Effect Setting
dialog box, use the
CURSOR
buttons to select whether to apply effects. After making the
selection, press the
NEXT
button or click
Next
.
fig.10-60a.e.eps_50
In this example, select
Apply System Effect
.
You can audition the effect-
applied sounds by pressing
the
REC MONITOR
button
on the U-8 Mixer, and can
adjust the final mix level
while listening the sounds.
Clicking
ADVANCED
in the effects edit screen opens the
Advanced Edit
screen
where you can make adjustments to all of the effect’s parameters. If
there are more than four parameters, you can freely create the sounds from
within this window. For more information, refer to the “Advanced Edit
Screen” in “Effects Edit Screen” in the U-8 Controller Manual.
DOWN
MIX
