89
Using Insertion Effects
■
Insertion Effect Parameters and their functions
■
EFX Type (Effect Type)
0
–64
Choose the type of the insertion effects.
For details about effect types, refer to p.91.
■
EFX Parameter (Effect Parameter)
If you change the EFX type, the parameters of that effect are displayed.
For details about effect parameters, refer to p.91.
■
EFX To Rev
0–
40
–127
Adjust the send level of the sound that comes after the insertion effect to Reverb.
■
EFX To Cho
0
–127
Adjust the send level of the sound that comes after the insertion effect to Chorus.
■
EFX To Dly
0
–127
Adjust the send level of the sound that comes after the insertion effect to Delay
Turning the Insertion Effect On/Off
After you set the insertion effect settings, you have to activate each part to use the
effects.
1
Make sure that the
Part Basic screen
is selected, and use
PART
[
] or
[
] to select the part.
2
Press [EDIT] to turn it on.
The editing screen will appear.
fig.9-72g
3
Press [EFFECT] ([F1]).
4
Press
VAR.
[
] or
INST
[
] to move the cursor to
EFX
.
5
Rotate the [VALUE] knob, or press [DEC] or [INC] to turn the Insertion
Effects ON/OFF.
Part Basic screen (p.29)
After you have finished
setting the value in step 5,
you can simultaneously
press [DEC] and [INC] to
transmit the currently
displayed parameter value.
(p.135)