manualshive.com logo in svg

Roland soljet pro4 xf 640, User Manual

Share
Download
Roland soljet pro4 xf 640 User Manual Download Page 69

Maintenance that Should Be Performed Daily

3

Maintenance

67

About Care and Maintenance of The Print Heads

Care of the print heads is essential to ensuring optimal printing at all times. There are daily care and periodic care.

When Using ECO-SOL MAX 2 Ink

Cleaning timing

Cleaning method

Page

Remarks

Before daily opera-

tions

Normal cleaning

P. 53 

Carry out a printing test. If dot drop-out 

occurs, perform cleaning.

When dot drop-outs 

are not fixed by 

performing normal 

cleaning multiple 

times

Medium cleaning

P. 68 

• If dot drop-outs are not fixed by perform

-

ing medium cleaning, perform powerful 

cleaning.

• This  consumes  more  ink  than  normal 

cleaning, and too-frequent use may dam-

age the print heads themselves. Avoid 

using it more than necessary.

Powerful cleaning

P. 69 

If colors are uneven

Light choke 

cleaning

P. 70 

Perform this cleaning when printed colors 

are unstable or uneven, e.g., when color 

density is inconsistent, even if the same 

data is printed with the same settings.

• Once per month

•  When  symptoms 

cannot be improved 

with medium or pow-

erful cleaning

Manual Cleaning

P. 72 

• We  recommend  that  you  perform  this 

cleaning periodically.

•  Replacing  the  wiper  and  felt  wiper  is 

also an effective means of improving the 

symptoms.

When Using ECO-SOL MAX 3 Ink

Cleaning timing

Cleaning method

Page

Remarks

Before the start of 

operations

Normal cleaning

P. 53 

Carry out a printing test. If dot drop-out 

occurs, perform cleaning.

If the message "TIME 

FOR MAINTENANCE" 

is displayed (ap-

proximately once per 

week)

Manual cleaning

P. 72 

"TIME FOR MAINTENANCE" is displayed

approximately once per week, but it may 

be displayed more frequently depend-

ing on the usage conditions. When this 

message is displayed, be sure to perform 

manual cleaning.

When dot drop-outs 

are not fixed by 

performing normal 

cleaning multiple 

times

Medium cleaning

P. 68 

• If dot drop-outs are not fixed by perform

-

ing medium cleaning, perform powerful 

cleaning.

• This  consumes  more  ink  than  normal 

cleaning, and too-frequent use may dam-

age the print heads themselves. Avoid 

using it more than necessary.

Powerful cleaning

P. 69 

If colors are uneven

Light choke 

cleaning

P. 70 

Perform this cleaning when printed colors 

are unstable or uneven, e.g., when color 

density is inconsistent, even if the same 

data is printed with the same settings.

When symptoms can-

not be improved with 

medium or powerful 

cleaning

Manual Cleaning

P. 72 

Replacing  the  wiper  and  felt  wiper  is 

also an effective means of improving the 

symptoms.

* The print head is component that wears out. Periodic replacement is required, with the frequency of replace-

ment depending on use. Purchase them from your authorized Roland DG Corp. dealer.

Summary of Contents for soljet pro4 xf 640























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands