Roland soljet pro4 xf 640, User Manual

Page: 50 / 150

Setup of Media
2
Basic Operation
48
4.
Perform the position correction of feed direction (alleviate horizontal stripes).

Press to select [SET].
Press to enable the setting.
The test pattern of feed correction is output.

When the left figure is displayed, press .

Use to set the correction value.
Press to enable the setting.

[To confirm again / To adjust again]
Press to select [YES].
Press to enable the setting.
The test pattern of feed correction is output again. Go back to the procedure

and set again.
[To go to the next after correction is completed]
Press to select [DONE].
Press to enable the setting.
For the individual setting method of this setting item and the description, refer to P. 102, "Alleviating Hori-
zontal Bands (feed correction function)"
Feed direction means the feed direction of the media. Perform the correction suitable for the media in
advance because horizontal strips are more likely to occur during printing when the moving distance
of the media varies slightly depending on the type and thickness of media.
CALIBRATION
[SET] NEXT
INPUT
ADJ. VALUES
CALIBRATION
0.10% -0.10%
To decide a correction value
Select the value to make the upper/lower rectangular gap and overlap smallest.
REDO ADJ.?
YES [DONE]
Current correction
value
Value to be set
Gap present Overlap
= Current
correction value
Smallest gap and overlap