manualshive.com logo in svg

Roland soljet pro4 xf 640, User Manual

Share
Download
Roland soljet pro4 xf 640 User Manual Download Page 56

Outputting

2

Basic Operation

54

Holding down 

 for one second or longer.

A test pattern is printed.

How to Perform a Normal Cleaning

Procedure

Press 

.

Press

.

Check the group with dot drop-out by viewing the printing-test results.

With normal cleaning, only groups of the print heads having dot drop-out are cleaned.

Press 

 to choose the group of print heads that 

is not to be cleaned.

Press 

to get rid of the group display.

Repeat this procedure to display the groups of only the print 

heads that require cleaning.

Only groups that is either A or B is displayed are objective for cleaning.

CLEANING

NORMAL  CL.

NORMAL  CL.

        A B

_

If the printing-test results are difficult to 

interpret

Examine the results from different angles in a 

well-lighted location. Take advantage of reflected 

light to enable visual checking.

Group A

Group B

Dot drop-out

Dot drop-out

Summary of Contents for soljet pro4 xf 640























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands