Roland soljet pro4 xf 640, User Manual

Page: 57 / 150

Outputting
2
Basic Operation
55

Press .
The screen shown in the figure appears and cleaning starts.
When it finishes, the screen shown in the figure appears again.

Press in this order to go back to the original screen.

Perform a printing test again to make sure the dot drop-out has been corrected.
If the problem persists, try performing cleaning a second time. If the printer has been used for a long period,
the problem may persist even after two or three-cycle cleaning. Then try cleaning using a different method.

P. 68, "When Normal Cleaning Is Not Effective"
When You Want to Clean All Print Heads Simultaneously
Hold down for one second or longer. Cleaning for all print heads starts automatically.
Getting Ready to Receive Data from a Computer
When P. 34, "Loading Media" and P. 55, "Getting Ready to Receive Data from a Computer" are completed,
get ready to receive the data from a computer.
CAUTION
Never touch the print heads while output is in progress.
The print heads move at high speed. Hitting may cause injury.
Procedure

Close the front cover.

Make sure stays steadily lit.
If is not lit, down the loading lever and press .

Wait until stays steadily lit.
CLEANING. . .
> > > > >
NORMAL CL.
A B _