Roland soljet pro4 xf 640, User Manual

Page: 145 / 150

143
7
Main Specifications
Specifications
XF-640
Printing technology
Piezoelectric inkjet
Media Width
259 to 1,625 mm (10.2 to 64 in.)
Thickness
Maximum 1.0 mm (39 mil) with liner
Roll outer diam-
eter
Maximum 210 mm (8.3 in.)
Roll weight
Max. 40 kg (88 lb.)
Core diameter
(*1)
76.2 mm (3 in.) or 50.8 mm (2 in.)
Printing width (*2)
Max. 1,615 mm (63.6 in.)
Ink
cartridges
Types ECO-SOL MAX 2 220-cc cartridge, 440-cc cartridge
ECO-SOL MAX 3 220-cc cartridge , 500-cc cartridge
Colors
Cyan, Magenta, Yellow, Black
Printing resolution (dots per
inch)
Maximum 1,440 dpi
Distance accuracy (*3)
Error of less than ±0.3 % of distance traveled, or ±0.3 mm, whichever is
greater
Media heating system(*4) Print heater and preheater, setting range for the preset temperature: 30
to 45°C (86 to 112°F)
Dryer, setting range for the preset temperature: 30 to 55°C (86 to 131°F)
Connectivity
Ethernet (10BASE-T/100BASE-TX, automatic switching)
Power-saving function
Automatic sleep feature
Power requirements
AC 100 to 120 V ±10%, 11 A, 50/60 Hz or AC 220 to 240 V ±10%, 6 A, 50/60 Hz
Power During operation Approx. 1,350W
Sleep mode
Approx. 20 W
Acoustic
noise level
During operation
62 dB (A) or less
During standby
45 dB (A) or less
Dimensions (with stand)
2,750(W) x 800(D) x 1,295 (H) mm (108 (W) x 31 (D) x 50 (H) in.)
Weight (with stand) 177 kg (390 lb.)
Environment Power on (*5)
Temperature: 15 to 32°C (59 to 90°F) (20°C [68°F] or more recommended),
humidity: 35 to 80%RH (non-condensing)
Power off
Temperature: 5 to 40°C (41 to 104°F), humidity: 20 to 80%RH (non-
condensing)
Accessories Exclusive stands, power cord, media clamps, media holder, replacement
blade for separating knife, software RIP, User's Manual, etc.
*1
The media holder of this machine is exclusive use for the media of paper tube (core) inner diameter 3 inches. To use 2
inches media, the optional media flanges are required.
*2
The length of printing is subject to the limitations of the program.
*3
 Media type: Media specified by Roland DG Corp.
 Temperature: 25°C (77°F), humidity: 50%
 Roll media must be loaded correctly.
 Excluding expansion/contraction of the media
 Not assured when the pre-heater, print heater or dryer is used.
 All correction or adjustment function of this machine has been made properly.
 Print travel: 1 m
*4
 Warm-up is required after power up. This may require 5 to 20 minutes, depending on the operating environment.
 Depending on the ambient temperature and media width, the preset temperature may fail to be reached.