Roland soljet pro4 xf 640 User Manual Download Page 132

Page: 132 / 150

Media Feed is Not Smooth

130

Media Feed Is Not Straight

Is the media loaded and set up straight and securely?

Feed is not smooth when the media is not straight or is tensioned unevenly on the left and right. Reload the
media.



P. 46, "Setup of Media ([Media Setting] menu)"

Media Feed Is Not Smooth

Do the media or the shafts strike some other object?

Make sure the media and the shafts do not touch anything else. This may affect output, even when feed ap-
pears to be smooth.



P. 46, "Setup of Media ([Media Setting] menu)"

Is the media too thick?

Media that is too thick may not only cause unstable feed, but may scrape the print heads, resulting in malfunc-
tion. Never use such media.

Are the grit rollers dirty?

Check to make sure the grit rollers are free of buildup of foreign material such as media scraps.



P. 66, "Cleaning"

Summary of Contents for soljet pro4 xf 640























































































































































Search results

Summary of Contents for soljet pro4 xf 640

Reviews:

Related manuals for soljet pro4 xf 640

Brands by name

Popular brands

Roland soljet pro4 xf 640, User Manual

Search results

Summary of Contents for soljet pro4 xf 640

Reviews:

Related manuals for soljet pro4 xf 640

Brands by name

Popular brands