Roland soljet pro4 xf 640, User Manual

Page: 117 / 150

Output Operation Management
5
To Administrators
115
Description
When "STOP" is selected, printing pauses and so colors may be uneven. Ensure a sufficient amount of remaining
ink before you begin printing. When "CONT." is selected, printing does not stop even if ink runs out completely.
To replace the cartridge, wait until printing ends or press
to pause printing.
Default Setting
[EMPTY MODE]: STOP
Displaying the Amount of Media Remaining
You can display how much of the media in use is left. First, you set the amount of media remaining, the amount
remaining is displayed at the top menu until it reaches zero.
Procedure

Press .

Press to display the left figure.
Press , and then .

Press .

Press to set the current amount of media
remaining.
Press to enable the setting.

Press in this order to go back to the
original screen.
Description
If you cancel the setup such as by removing the media or raising the loading lever, the amount remaining at
that time flashes on the screen. Because the amount of media remaining is not updated automatically when
you change the media, redo the setting whenever you change the media. You can also make the setting display
this menu automatically whenever you change the media. See the next section, "Making Sure to Verify the
Setting for the Amount Remaining Every Time the Media Is Changed."
Note: The remaining amount that is displayed is only an estimate, and its accuracy is not assured.
MENU
SHEET REMAIN
SHEET REMAIN
SET LENGTH
SET LENGTH
0.0 m 25.0 m
W 1200mm L 25. 0m
SETUP SHEET
ROLL L 25. 0m
This display is updated.
If setup has not been performed,
the set value flashes.