RML-1
PROGRAMING GUIDELINE
- 36 -
The errors described here are all communication-related, and are
unrelated to errors that may occur in the interpretation of RML commands.
Specifically, this applies only to 10 through 18, and has no connection with
errors whose numbers are less than 10.
When more than one error occurs, the first error number is the one that is
saved.
Those coming after are ignored.
Parallel
The extent of interpretation is model-dependent, but cases of operation
similar that when using the serial connection are also possible.
Note that those commands which are physically inoperable, such as those
that perform response, are naturally not supported.
Replot
Nothing is performed.
4-2;Descriptions of Device Control Commands
ESCK Command
ESC.K Command-quit command
<Format>
[ESC].K
[ESC] is actually one character. It corresponds to 1B hexadecimal.
<Description>
This ends operation of the command now being executed and discards
without executing it all buffered data until the next ESC.K after the
command is processed.
<Errors>
None.
Other Device Control Commands
Other device control commands are basically unsupported.
5;Appendix
5-1,Three-dimensional Movement
Clipping Behavior During Three-dimensional Operation