Roland Music Atelier AT-45, Owner'S Manual

Page: 185 / 228

185
Chapter 11 Connecting with External Device
Connecting to Audio
Equipment
When you connect the AT-45 to audio equipment, you can
play the sounds from the AT-45 through the speakers on the
audio equipment or record your performances on a tape
recorder or other recording device.
When connecting, please use an audio cable with a standard
phone plug, such as the PCS-100PW (sold separately). When
purchasing an audio cable, please consult the vendor where
you bought the AT-45.
Connectors
Output Jacks
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the AT-45 through the
speakers on the connected equipment or record your
performances on a tape recorder or other recording device.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
fig.
Input Jacks
You can connect another sound module, such as audio
equipment or an electronic instrument using audio cables
(sold separately) and play the sounds from the connected
device through the speakers on the AT-45.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
fig.
Making the Connections
When connecting, turn on power to your various devices in
the order specified. Failure to follow these steps in the order
given could cause a malfunction and/or damage to speakers
or other equipment.
Playing Sounds from the AT-45 Through the
Speakers on Audio Equipment or Recording
Your Performances on a Recording Device
1.
Turn the volume all the way down on the AT-45
and on the device you’re about to connect.
2.
Turn off the power to the AT-45 and other
connected equipment.
3.
Use audio cables (sold separately) to make the
connection.
4.
Switch on the AT-45.
5.
Switch on the connected device.
6.
Adjust the volume level on the AT-45 and the
connected device.
Recording AT-45 Performances on a Recording
Device
7.
Start recording with the connected device.
8.
Play the keyboard.
9.
When the performance ends, stop recording on
the connected equipment.
Playing Audio Equipment Sounds Through the
Speakers on the AT-45
1.
Turn the volume all the way down on the AT-45
and on the device you’re about to connect.
2.
Turn off the power to the AT-45 and other
connected equipment.
3.
Use audio cables (sold separately) to make the
connection.
4.
Turn on the connected equipment.
5.
Turn on the AT-45.
6.
Adjust the volume level on the AT-45 and the
connected device.
After use, turn off the power using the following procedure.
1.
Turn the volume all the way down on the AT-45
and on the device you’re about to connect.
2.
Turn off the connected equipment.
3.
Turn off the AT-45.
AT-45_e.book 185 ページ ２００５年２月２１日 月曜日 午後５時４３分