Roland Music Atelier AT-45 Owner'S Manual Download Page 100

Page: 100 / 228

100

Chapter 3 Using the Registration Buttons

Touch <

> to select the registration that you wish

to load into internal memory.

fig.03-17_55

To cancel operation, touch <Exit>.

Touch <Load>.

The following screen appears.

fig.03-26_55

To cancel operation, touch <Cancel>.

Touch the screen to select the model on which the

Registration was created.

Touch <OK> to confirm the model on which the Registration

was created.

If the Rhythm used by the Registration is found in the internal memory of
the AT-45, the Registration will be loaded into internal memory.

When loading is complete, the Registration Load screen will reappear.

NOTE

If the Rhythm of the [Disk/
User] button has been
rewritten, there may be
cases in which the
Registration cannot be
loaded correctly.

AT-45_e.book 100 ページ２００５年２月２１日　月曜日　午後５時４３分

Summary of Contents for Music Atelier AT-45





































































































































































































































Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands

Roland Music Atelier AT-45, Owner'S Manual

Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands