Roland Music Atelier AT-45 Owner'S Manual Download Page 162

Page: 162 / 228

162

Chapter 9 Creating Original Accompaniment
Rhythms

■

Making the Division Settings

Independent “Drum Set,” “Beat,” and “Volume” settings can
be made for each Division.

Bring up the Rhythm Customize screen (p. 159).

Touch <

> (Utility).

The Utility screen appears.

Touch <Div Options> (Division Options).

The Division Options screen appears.

Changing the Drum Set

Touch the value set for Drum Set.

Touch <

> to change the setting.

Touch <Exit>.

The Division Options screen reappears.

Changing the Beat

Touch the Beat setting.

Touch <

> to change the setting.

Touch <Exit>.

The Division Options screen reappears.

Changing the Volume

10.

Touch the Volume setting.

11.

Touch <

> to change the setting.

AT-45_e.book 162 ページ２００５年２月２１日　月曜日　午後５時４３分

Summary of Contents for Music Atelier AT-45





































































































































































































































Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands

Roland Music Atelier AT-45, Owner'S Manual

Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands