Roland Music Atelier AT-45 Owner'S Manual Download Page 166

Page: 166 / 228

166

Chapter 9 Creating Original Accompaniment
Rhythms

■

Changing and Deleting the
Instruments Used

You can change an instrument used in a rhythm and replace
it with another instrument.

Bring up the Rhythm Customize screen (p. 159).

Touch the section in the Rhythm Customize
screen where the instrument names are displayed.

The Instrument Edit screen appears.

You can open Instrument Edit screen using the following
procedure.

Touch <

> (Utility) in the Rhythm

Customize screen (p. 159).

The Utility screen appears.

Touch <Inst Edit> (Instrument Edit).

The Instrument Edit screen appears.

Changing the Instrument Used

Touch <

> in the screen to select the

name of the instrument you want to change.

Touch <Change>.

The following screen appears.

Touch <

> to switch the screen, then

touch the instrument name.

The following screen appears.

To cancel operation, touch <Cancel>.

If you want to change the instrument, touch
<OK>.

The instrument is changed.

Deleting an Instrument

You can delete an instrument used in a rhythm. When an
instrument is deleted, all of the sounds using that instrument
are deleted from the rhythm.

Touch <

> in the screen to select the name

of the instrument you want to delete.

Touch <Delete> on the Instrument Edit screen.

If you are sure that you wish to delete the
instrument, touch <OK>.

The selected instrument is deleted.

AT-45_e.book 166 ページ２００５年２月２１日　月曜日　午後５時４３分

Summary of Contents for Music Atelier AT-45





































































































































































































































Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands

Roland Music Atelier AT-45, Owner'S Manual

Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands