Roland Music Atelier AT-45 Owner'S Manual Download Page 90

Page: 90 / 228

Chapter 3 Using the Registration Buttons

If the following screen appears

If you select a number at which a registration has already been saved and
touch <Save>, the following screen appears.

fig.E-63

If you wish to update the contents of the Registration data

Touch <OK>.

If you wish to save new data instead of updating the registration

Touch <Cancel>.

Rewriting of the Registration will be canceled.

In the Registration Save screen, select the number that is

displayed as “-----” (a number that currently does not contain
registration data).

Save the Registration (p. 88).

When saving is complete, the saved registration name will be displayed.

AT-45_e.book 90 ページ２００５年２月２１日　月曜日　午後５時４３分

Summary of Contents for Music Atelier AT-45





































































































































































































































Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands

Roland Music Atelier AT-45, Owner'S Manual

Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands