Roland Music Atelier AT-45 Owner'S Manual Download Page 113

Page: 113 / 228

113

Chapter 5 Applying Various Effects to the Sound

■

Rotary Color

This setting allows you to choose the brightness of the Rotary
sound obtained when using the Rotary effect (p. 111).

Touch <Sound/Kbd> on the Main screen.

fig.05-08_50

The Sound/Keyboard screen appears.

Touch <Effect>.

The Effect screen appears.

fig.05-17_50

Touch <

> to display the Rotary Color.

Touch the value setting buttons for Rotary Color
to adjust the setting.

Each time you touch the Rotary Color setting, it will
switch between “BRIGHT” and “MELLOW.”

Settings

BRIGHT, MELLOW

Touch <Exit>.

These settings remain stored in memory even while the
power is off.

AT-45_e.book 113 ページ２００５年２月２１日　月曜日　午後５時４３分

Summary of Contents for Music Atelier AT-45





































































































































































































































Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands

Roland Music Atelier AT-45, Owner'S Manual

Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands