Roland Music Atelier AT-45 Owner'S Manual Download Page 145

Page: 145 / 228

145

Chapter 7 Recording/Playing Back What You Play

If the following screen appears

The message below is shown when the performance song in
the unit has not been saved to disk.

fig.E-62

If you wish to erase the performance song

Touch the <OK> button.

If you wish to save the performance song on a
floppy disk

Touch the <Cancel> button.

Save the song on a floppy disk (p. 143).

If loading is canceled because the memory limit has been
reached, the following message will be displayed:

fig.E-30

Deleting Performance Songs

Stored on Disk

You can delete a performance song that was saved onto a
floppy disk.

Insert the floppy disk containing the performance
data into the disk drive.

Touch <Rec/Play> on the Main screen.

The Rec/Play screen appears.

In the lower right of the screen, touch <

(Utility).

The Utility screen appears.

Touch <Save/Delete>.

The Song Save/Song Delete screen appears.

fig.07-31_50

Touch <

> to select the performance data

that you wish to delete.

Touch <Delete>.

The confirmation message appears.

fig.07-

If you touch <Cancel> the performance data will not be
deleted.

When you touch <OK> the performance data will
be deleted.

AT-45_e.book 145 ページ２００５年２月２１日　月曜日　午後５時４３分

Summary of Contents for Music Atelier AT-45





































































































































































































































Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands

Roland Music Atelier AT-45, Owner'S Manual

Search results

Summary of Contents for Music Atelier AT-45

Reviews:

Related manuals for Music Atelier AT-45

Brands by name

Popular brands