148
Chapter 7 Recording/Playing Back What You Play
Recording and Layering
Drum Parts (Loop Recording)
You can repeatedly record over a specified region of the
rhythm part, adding additional notes at each pass. This type
of recording is called “Loop Recording.”
This recording method is convenient when you wish to layer
drum sounds individually for the Rhythm part.
NOTE
“Loop Recording” can be used only when recording the
Rhythm part.
1.
Press the [Drums/SFX] button to select a Drum
Set or Sound Effect Set (p. 48).
2.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
3.
Touch the <Bwd> and <Fwd> on the Rec/Play
screen, move to the measure where you wish to
start Loop Recording.
4.
Touch <
> (Utility).
The Utility screen appears.
fig.07-
5.
Touch <Loop Rec>.
The Loop Rec screen appears.
fig.07-
6.
Touch the “For” value (the number of measures
that will be recorded repeatedly).
fig.07-
To cancel operation, touch <Exit>.
7.
Touch <
><
> to specify the “For” value (the
number of measures that will be recorded
repeatedly).
8.
Touch <Rec>.
The Rec/Play screen appears, and the unit is placed in
recording standby.
9.
Touch <Play> to begin recording.
When you touch the <Play> button, the metronome will
play two measures (bars) of count-in before recording
begins.
You can record repeatedly over the specified range of
measures, adding additional notes at each pass.
10.
Touch <Stop> to stop playback.
The indicator of the Rhythm track button which
recorded the performance will light.
AT-45_e.book 148 ページ 2005年2月21日 月曜日 午後5時43分
Summary of Contents for Music Atelier AT-45
Page 223: ...223 Index Volume Master Volume 17 Part Balance 44 ...
Page 224: ...224 MEMO ...
Page 225: ...225 MEMO ...