Roland Music Atelier AT-45, Owner'S Manual

Page: 104 / 228

104
Chapter 4 Using the Performance Functions
Using the Foot Switches
On either side of the expression pedal are two Foot Switches. Different
functions are assigned to each of these two foot switches.
fig.04-07
With the factory settings, the following functions are assigned to the left and
right Foot Switches.
You can store functions to be assigned to the foot switch to individual
Registration buttons (p. 80).
Right Foot Switch
Switch the Rotary effect between Fast/Slow.
If Rotary is turned on, the Rotary effect will switch
between “Fast” and “Slow” each time you press the Foot
Switch.
Left Foot Switch
Glide (an effect by which the pitch is lowered by a
semitone while the foot switch is pressed, and is
returned to what is originally was when you release
your foot).
While you are pressing the Foot Switch, the pitch will be
temporarily lowered. When you release the Foot Switch,
the pitch will return to normal gradually.
You can also change the
functions assigned to the
left and right Foot
Switches. Please refer to
“Changing the Function
of the Foot Switch” (p.
105).
The Glide effect will only
be applied to the keyboard
section that has been
specified as being the
destination for the Pitch
bend/Vibrato lever. Please
refer to
“Selecting the
Keyboard to Which the
Pitch Bend/Vibrato Lever
will Apply”
(p. 171).
NOTE
If “Regist Shift” is turned
“RIGHT,” “LEFT,” or
“RIGHT +Load Next,” the
foot switch will function
only to switch registrations
(p. 106).
AT-45_e.book 104 ページ ２００５年２月２１日 月曜日 午後５時４３分