Roland LEC-300, User Manual

Page: 91 / 150

89 Chapter 5 Feature Reference
5-5 Optimizing Printing to Match Media Thickness
Adjusting Head Height to Match Media Thickness
Procedure
 Press .
Press several times.

Press .

Open the front cover.
Move the lever to adjust the height of
the head.
Moving the lever to "HIGH" makes a warning
beep sound twice. Moving it to "LOW" makes the
warning beep sound once.

Close the front cover.
The print heads return to their original position and the screen shown in the figure
appears.

Press .
Press to go back to the original screen.
Description
Depending on the media, media may wrinkle or come loose from the platen during printing, increasing the chance of contact
with the print heads. When you are using such media, adjust the head height to "HIGH."
Printing quality when the head height is set to “HIGH” may be coarser or otherwise lower than when set to “LOW.” If this hap-
pens, refer to the pages indicated below.

P. 82, "Preventing Soiling of the Media and Dot Drop-out During Printing," p. 90, "Correcting for Misalignment in Bidirectional Printing,"
p. 91, "Correcting for Misalignment in Bidirectional Printing More Precisely"
Default Setting
[HEAD HEIGHT]: LOW
MENU
HEAD HEIGHT
HEAD HEIGHT
LOW
LOW
MENU
HEAD HEIGHT
W 736mm
SETUP SHEET
ROLL
Height-adjustment lever
Move firmly, until it stops.
HIGH
LOW