As an E
NERGY
S
TAR
®
Partner, Roland DG Corp. has determined that this product meets the E
NERGY
S
TAR
®
guidelines for
energy efficiency. The International E
NERGY
S
TAR
®
Office Equipment Program is an international program that promotes
energy saving through the penetration of energy efficient computers and other office equipment. The program backs
the development and dissemination of products with functions that effectively reduce energy consumption. It is an
open system in which business proprietors can participate voluntarily. The targeted products are office equipment such
as computers, monitors, printers, facsimiles, copiers, scanners, and multifunction devices. Their standards and logos are
uniform among participating nations.
Unauthorized changes or modification to this system can void the
users authority to operate this equipment.
When the equipment requires a usb cable, it must be shielded
type.
For Canada
CLASS A NOTICE
This Class A digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
CLASSE A AVIS
Cet appareil numérique de la classe A respecte toutes les exigen-
ces du Règlement sur le matériel brouilleur du Canada.
NOTICE
Grounding Instructions
In the event of a malfunction or breakdown, grounding provides
a path of least resistance for electric current to reduce the risk of
electric shock. This tool is equipped with an electric cord having
an equipment-grounding conductor and a grounding plug. The plug
must be plugged into a matching outlet that is properly installed and
grounded in accordance with all local codes and ordinances.
Do not modify the plug provided - if it will not fit the outlet, have the
proper outlet installed by a qualified electrician.
Improper connection of the equipment-grounding conductor can
result in a risk of electric shock. The conductor with insulation hav-
ing an outer surface that is green with or without yellow stripes is
the equipment-grounding conductor. If repair or replacement of the
electric cord or plug is necessary, do not connect the equipment-
grounding conductor to a live terminal.
Check with a qualified electrician or service personnel if the ground-
ing instructions are not completely understood, or if in doubt as to
whether the tool is properly grounded.
Use only 3-wire extension cords that have 3-prong grounding plugs
and 3-pole receptacles that accept the tool's plug.
Repair or replace damaged or worn cord immediately.
This product is using GNU General Public License (GPL) / GNU Lesser General Public License (LGPL) software. You have the right to acquire,
modify, and distribute the source code for this GPL/LGPL software. You can obtain the GPL/LGPL source code used in this product by down-
loading it from the following website.
URL: http://www.rolanddg.com/gpl/
RolandDG Corp. has licensed the MMP technology from the TPL Group.
WARNING
This product contains chemicals known to cause cancer, birth defects
and other reproductive harm, including lead.
For California
For USA
FEDERAL COMMUNICATIONS COMMISSION RA-
DIO FREQUENCY INTERFERENCE STATEMENT
NOTE: This equipment has been tested and found to comply with
the limits for a Class A digital device, pursuant to Part 15 of the
FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commer-
cial environment.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio com-
munications.
Operation of this equipment in a residential area is likely to cause
harmful interference in which case the user will be required to cor-
rect the interference at his own expense.
For EU Countries
The authorized representative in the EU:
Roland DG Corporation, German Office Halskestr. 7, 47877 Willich,Germany
Manufacturer:
ROLAND DG CORPORATION
1-6-4 Shinmiyakoda, Kita-ku, Hamamatsu-shi, Shizuoka-ken, 431-2103 JAPAN
WARNING
This is a Class A product. In a domestic environment this product
may cause radio interference in which case the user may be required
to take adequate measures.
For EU Countries
Summary of Contents for LEC-300
