Roland JX-3P, Manual

Page: 25 / 57

25
TONE - DCO
(Digitally Controlled Oscillator)
Parameter Edit Location Values
Range 16', 8', 4' A-1 DCO 1
B-1 DCO 2
1 = 16', 2=8', 3=4'
Wave Saw, Pulse, Square
Noise (DCO2 Only) A-2 DCO 1
B-2 DCO 2
1 = Saw, 2= Pulse, 3=Square
1 = Saw, 2= Pulse, 3=Square, 4 = Noise
DCO Coarse Tune
± 1 Octave
A-3
B-3 Range 0-127 (-1200 cents -> +1200 cents)
± 1 Octave
DCO 2 Fine Tune B-4 Range 0-127 (~-50 cents -> +50 cents)
DCO 1 LFO Modulation Depth
DCO 2 LFO Modulation Depth A-5
B-5 Range 0-127
DCO 1 LFO Source
DCO 2 LFO Source A-6
B-6 1 = LFO 1, 2 = LFO 2
DCO 1 Env Modulation Depth
DCO 2 Env Modulation Depth A-7
B-7 Range ±63 - Note - this control is center off
DCO 1 Env Source
DCO 2 Env Source A-8
B-8 1 = ENV 1, 2 = ENV 2
DCO 2 Cross Modulation A-4 1 = Off, 2= Sync, 3= Metal
DCO Mix A-10 Range 0-127 (0=DCO1, 64 = 50/50, 127 = DCO2)
TONE - VCF
(Voltage Controlled Filter)
Parameter Edit Location Values
VCF Cutoff C-1 Range 0-127
VCF Resonance C-2 Range 0-127
VCF Pitch Follow C-3 Range 0-127
HPF Cutoff Frequency C-4 Range 0-127
VCF LFO Modulation Depth C-5 Range 0-127
VCF LFO Source C-6 1 = LFO 1, 2 = LFO 2
VCF Env Modulation Depth C-7 Range ±63 - Note - this control is center off
VCF Env Source C-8 1 = ENV 1, 2 = ENV 2
www.kiwitechnics.com 3P Upgrade User Manual v400