Roland JX-3P, Manual

Page: 52 / 57

52
Table 1.0 Command ID Data Byte Data Type
Byte details
7 ------- 0
Data Details
$3e (62) = VCA Control 00000yxw w = Gate (set=Gate - overrides x)
x = Env 1/2 (set=Env2)
y = LFO 1/2 (set=LFO2)
$3f (63) = Not Used 00000000 Not Used
$40 (64) = Portamento Rate 0xxxxxxx (0-127)
$41 (65) = Not Used 00000000 Not Used
$42 (66) = Load Sequence 000xxxxx xxxxx = Sequence number to load
0 = do not load Sequence
1-8 = Load Seq # 1-8
$43 (67) = Load Pattern 000xxxxx xxxxx = Pattern number to load
0 = do not load Pattern
1 = 16 Load Patt # 1-16
$44 (68) = Bend Control 0vwwxyzz zz = DCO Bend
00=off
01=DCO1
10=DCO2
11=Both
y = Mix Bend On/Off (set=On)
x = Cutoff Bend On/Off (set=On)
ww = LFO Bend
00=off
01=LFO1
10=LFO2
11=Both
v = VCA Level On/Off (set=On)
$45 (69) = MW DCO Control 0wxxyyzz zz = MW DCO Freq
00=off
01=DCO1
10=DCO2
11=Both
yy = MW DCO LFO Amount
00=off
01=DCO1
10=DCO2
11=Both
xx = MW DCO Env Amount
00=off
01=DCO1
10=DCO2
11=Both
w = MW DCO Mix On/Off (set=On)
www.kiwitechnics.com 3P Upgrade User Manual v400