Roland JX-3P, Manual

Page: 10 / 57

10
Preset Section
Bank Buttons (A~D)
There are 4 Bank 'Sets' in the 3P Upgrade giving a total of 256 Tones. Sets are changed
by pressing the same Bank button twice. The Bank lights will show which Bank is
selected as follows
Bank Set 1 Selected Bank On Steady - others Off
Bank Set 2 Selected Bank On Flashing - others Off
Bank Set 3 Selected Bank Off - others On Steady
Bank Set 4 Selected Bank Flashing - others On Steady
Tone Selector Buttons (1~16)
32 different patches have been pre-
programmed in the 3P Upgrade. These have
been made close to the original 3P patches. All
these can be edited and restored. When
selecting a patch select a combination of the
Bank button and the Tone button. The Bank
and Tone buttons will light to show the
selection.
Note - The memory protection switch on the
rear of the 3P will prevent memory writing. The
write button will not function if the rear panel
switch is in the middle position.
All the Tone
lights will flash once if a write is attempted with
the protect on.
•
You can only select one patch at a time
•
All tones on Banks C to P contain a
generic tone only from the factory and
can be programmed with your own
synthesized sounds
•
All patches on all banks can be
programmed (256 in total)
www.kiwitechnics.com 3P Upgrade User Manual v400