22
Setting up with External Devices
You can adjust the tempo, and start
or stop the Sequencer of the JX-3P
with the controls on the external unit.
Before
starting
external
synchronization with the external
unit, make sure that the built-in
sequencer in the JX-3P is not
running. Press the Start/Stop button
and it's indicator will light then start
the synchronization.
Midi Notes
If your JX-3P has Midi though fitted
this should be used if multiple units
are being used on the midi chain to
reduce delays. While every effort has
been made to make the midi as fast
as is possible within the
KiwiTechnics JX-3P Upgrade there
will always be small delays between
the midi input and midi output as the
commands need to be interpreted
which cannot be done until a full
command arrives. Full midi
command details are at the end of
the manual.
Hold Pedal
The Roland DP-2 is shown but any
pedal that shorts the tip to ground
when not pressed can be used. It
will need to go open circuit when
pressed to suit the JX-3P
The operation of the hold has
changed from the original 3P.
Pressing the hold pedal will set the
envelope release time to maximum
if the VCA mode has been set to
'Envelope' or toggle the Hold button
if the VCA mode has been set to
'Gate'. This has a more natural
piano like operation for the
Envelope mode.
www.kiwitechnics.com
3P Upgrade User Manual v400
Summary of Contents for JX-3P
