Roland Juno-Stage, User Manual

Page: 188 / 256

188
Effects List
fig.MFX-73
fig.MFX-74
fig.MFX-75
fig.MFX-76
73: ENHANCER
→
FLANGER
Parameter Value Explanation
Enhancer Sens # 0–127 Sensitivity of the enhancer
Enhancer Mix # 0–127
Level of the overtones generated
by the enhancer
Flanger Pre Delay 0.0–100 msec
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Flanger Rate #
0.05–10.00 Hz,
note
Frequency of modulation
Flanger Depth 0–127 Depth of modulation
Flanger
Feedback #
-98–+98%
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Flanger Balance #
D100:0W–
D0:100W
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Level 0–127 Output Level
74: ENHANCER
→
DELAY
Parameter Value Explanation
Enhancer Sens # 0–127 Sensitivity of the enhancer
Enhancer Mix # 0–127
Level of the overtones generated
by the enhancer
Delay Time 0–2600 msec, note
Adjusts the delay time from the
direct sound until the delay
sound is heard.
Delay
Feedback #
-98–+98%
Adjusts the proportion of the
delay sound that is fed back into
the effect. Negative (-) settings
will invert the phase.
Delay HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above
which sound fed back to the
effect will be cut. If you do not
want to cut the high frequencies,
set this parameter to BYPASS.
Delay Balance # D100:0W–D0:100W
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Level 0–127 Output Level
Feedback
Flanger
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
Feedback
Delay
L in
R in
L out
R out
Mix
Mix
Enhancer
Enhancer
Balance W
Balance W
Balance D
Balance D
75: CHORUS
→
DELAY
Parameter Value Explanation
Chorus Pre
Delay
0.0–100 msec
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
Chorus Rate # 0.05–10.00 Hz, note Frequency of modulation
Chorus Depth 0–127 Depth of modulation
Chorus
Balance #
D100:0W–D0:100W
Volume balance between the
direct sound (D) and the chorus
sound (W)
Delay Time 0–2600 msec, note
Adjusts the delay time from the
direct sound until the delay sound
is heard.
Delay
Feedback #
-98–+98%
Adjusts the proportion of the delay
sound that is fed back into the
effect. Negative (-) settings will
invert the phase.
Delay HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the
high frequencies, set this
parameter to BYPASS.
Delay
Balance #
D100:0W–D0:100W
Adjusts the volume balance
between the sound that is sent
through the delay (W) and the
sound that is not sent through the
delay (D).
Level 0–127 Output Level
76: FLANGER
→
DELAY
Parameter Value Explanation
Flanger Pre Delay 0.0–100 msec
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
Flanger Rate # 0.05–10.00 Hz, note Frequency of modulation
Flanger Depth 0–127 Depth of modulation
Flanger
Feedback #
-98–+98%
Adjusts the proportion of the
flanger sound that is fed back into
the effect. Negative (-) settings will
invert the phase.
Flanger Balance # D100:0W–D0:100W
Volume balance between the
direct sound (D) and the flanger
sound (W)
Delay Time 0–2600 msec, note
Adjusts the delay time from the
direct sound until the delay sound
is heard.
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Chorus
Balance W
Balance W
Balance D
Balance D
Feedback
Delay
L in
R in
L out
R out
Balance W
Balance W
Balance D
Balance D
Flanger
Balance W
Balance W
Balance D
Balance D
Feedback
JUNO-STAGE_e.book 188 ページ ２００８年１０月１７日 金曜日 午後１２時２７分