Roland Juno-Stage, User Manual

Page: 180 / 256

180
Effects List
Produces three delay sounds; center, left and right.
fig.MFX-47
This effect has four delays.
fig.MFX-48a
fig.MFX-48b
Stereo location of each delay
This effect provides four delays. Each of the Delay Time parameters
can be set to a note length based on the selected tempo. You can also
set the panning and level of each delay sound.
fig.MFX-49
47: 3TAP PAN DELAY
Parameter Value Explanation
Delay Left/
Right/Center 0–2600 msec,
note
Adjusts the time from the original sound
until the left, right, and center delayed
sounds are heard
Center
Feedback #
-98–+98%
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-)
settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high
frequencies, set this parameter to BYPASS.
Left/Right/
Center Level
0–127 Volume of each delay
Low Gain -15–+15 dB Gain of the low frequency range
High Gain
-15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W Volume balance between the direct sound
(D) and the delay sound (W)
Level 0–127 Output level
48: 4TAP PAN DELAY
Parameter Value Explanation
Delay 1–4 Time
0–2600 msec,
note Adjusts the time from the original sound
until delay sounds 1--4 are heard
Delay 1
Feedback #
-98–+98%
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-)
settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
do not want to filter out any high
frequencies, set this parameter to BYPASS.
Delay 1–4 Level 0–127 Volume of each delay
Low Gain -15–+15 dB Gain of the low frequency range
High Gain
-15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W Volume balance between the direct sound
(D) and the delay sound (W)
Level 0–127 Output level
L in
R in
L out
R out
Left Tap
Right Tap
Triple Tap Delay
2-Band
EQ
2-Band
EQ
Balance W
Balance D
Balance W
Balance D
Feedback
Center Tap
L in
R in
L out
R out
Quadruple Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 2
Delay 3
Delay 4
Feedback
1
2 3
4
L
R
49: MULTI TAP DELAY
Parameter Value Explanation
Delay 1–4 Time
0–2600 msec,
note Adjusts the time until Delays 1–4 are
heard.
Delay 1
Feedback #
-98–+98%
Adjusts the amount of the delay sound
that’s fed back into the effect. Negative (-)
settings invert the phase.
HF Damp
200–8000 Hz,
BYPASS
Adjusts the frequency above which sound
fed back to the effect is filtered out. If you
don’t want to filter out any the high
frequencies, set this parameter to BYPASS.
Delay 1–4 Pan L64–63R Stereo location of Delays 1–4
Delay 1–4 Level 0–127 Output level of Delays 1–4
Low Gain -15–+15 dB Gain of the low frequency range
High Gain -15–+15 dB Gain of the high frequency range
Balance #
D100:0W–
D0:100W Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
L in
R in
L out
R out
Multi Tap Delay
Balance W
Balance D
Balance W
Balance D
Delay 1
Delay 3
Delay 4
Delay 2
Feed
back
2-Band
EQ
2-Band
EQ
JUNO-STAGE_e.book 180 ページ ２００８年１０月１７日 金曜日 午後１２時２７分