Roland Juno-Stage, User Manual

Page: 119 / 256

119
Chapter 8. Detailed Editing for Patches
Saving a Patch Whose Settings You’ve Edited
([WRITE])
If you want to save a patch whose settings (Lid State, Resonance,
EFFECT, etc.) you’ve edited in Piano mode, use [WRITE] to save the
patch.
For details on saving a patch, refer to “Saving a Patch You’ve Created
([WRITE])” (p. 97).
The “EFFECT” settings are only for Piano mode. The effect you’ve
specified in Piano mode will be applied regardless of the effect
settings of the patch you’ve selected.
Saving the Patch that will be Selected
When You Press [PIANO MODE] (WRITE)
You can store the patch that will be selected first when you press
[PIANO MODE] after the instrument’s been powered up. This will also
save the Key Touch setting (p. 117).
1. In the PIANO MODE screen, press [6 (LIST)].
The PIANO PATCH LIST screen will appear.
2. Use [ ] [ ] to choose “AC.PIANO” or “EL.PIANO,” and use
the VALUE dial or [DEC] [INC] to select a patch.
3. Press [7 (WRITE)].
The patch selected in the list when you press [7 (WRITE)] will be
the patch that is selected when you press [PIANO MODE] the
next time you power up the JUNO-STAGE.
Never turn off the power while data is being saved.
Saving Your Piano Mode Settings
JUNO-STAGE_e.book 119 ページ ２００８年１０月１７日 金曜日 午後１２時２７分