background image

 

151

Chapter 11. Other Settings

 

[4 (RX)]

 

[5 (SYNC)]

 

[2 (CLICKOUT)]

 

[3 (PLAYER)]

 

Parameter

Value

Explanation

Receive Program Change

 

OFF, ON

Specifies whether Program Change messages will be received (ON) or not (OFF).

 

Receive Bank Select

 

OFF, ON

Specifies whether Bank Select messages will be received (ON) or not (OFF).

 

Receive Exclusive

 

OFF, ON

Specifies whether System Exclusive messages will be received (ON) or not (OFF).

 

Receive GM System On

 

OFF, ON

Specifies whether General MIDI System On messages will be received (ON) or not (OFF).

 

Receive GM2 System On

 

OFF, ON

Specifies whether General MIDI 2 System On messages will be received (ON) or not (OFF).

 

Receive GS Reset

 

OFF, ON

Specifies whether GS Reset messages will be received (ON) or not (OFF).

 

Parameter

Value

Explanation

Sync Mode

 

MASTER, 
SLAVE, 
REMOTE 

Specifies the synchronization signals that the JUNO-STAGE will follow.   

 

MASTER

 

: The JUNO-STAGE will be the master. Choose this setting if you’re operating the 

JUNO-STAGE by itself, without synchronizing it to any other device.   

 

SLAVE

 

: The JUNO-STAGE will be the slave. Choose this setting if you want the JUNO-STAGE to 

operate according to MIDI Clock messages received from an external device.   

 

REMOTE

 

: The JUNO-STAGE will obey MIDI Start, Continue, and Stop messages from an external 

device, but will use its own tempo setting.

 

Sync Output

 

OFF, ON

If this is ON, the JUNO-STAGE will transmit synchronization-related MIDI messages (MIDI Clock, Start, 
Continue, Stop) to an external MIDI device. 

* This cannot be set if Sync Mode is “SLAVE.”

 

Tempo Override

 

OFF, ON

If this is ON, switching performances will make the tempo change to the “Recommended Tempo” 
specified for that performance.

 

System Menu [5 (CLICK/PLAYER)]

 

Parameter

Value

Explanation

Click Setting

Song/Click Output 
Mode

 

CLICK, SONG

 

CLICK:

 

 If SMF data is being played back, the SONG/CLICK OUT jack will output a click sound.

The SONG/CLICK OUT jack will output either the click sound (while playing back SMF data) or the 
song (while playing back audio data).
The OUTPUT L/R jacks will output the song. 

 

SONG:

 

 The SONG/CLICK OUT jack will output the song.

The SONG/CLICK OUT jack will output the song.
The OUTPUT L/R jacks will not output the click or the song.

* This setting is valid if the song is SMF data. If the song is audio data, the sound of the song will 

always be output, regardless of this setting.

 

Click Level

 

0–10

Volume of the click

 

Click Sound

 

TYPE1–TYPE4

Sound type of the click

 

TYPE 1:

 

 A conventional click sound (A bell will sound on the first beat.)

 

TYPE 2:

 

 Clicks

 

TYPE 3:

 

 Beeps

 

TYPE 4:

 

 Cowbell

 

Level
Song/Click Output 
Level

 

0–127

Volume of the output from the SONG/CLICK OUT jack

 

Parameter

Range

Explanation

Song Player Level
Audio Level

 

0–127

Sets the volume at which audio files will be played by the song player.

 

SMF Level

 

0–127

Sets the volume at which SMF will be played by the song player.

JUNO-STAGE_e.book 151 ページ 2008年10月17日 金曜日 午後12時27分

Summary of Contents for Juno-Stage

































































































































































































































































Reviews: