Roland Juno-Stage, User Manual

Page: 139 / 256

139
Chapter 10. Detailed Editing for Performances
PART MIXER Screen
fig.disp-partmixer.eps
In the PERFORM PLAY screen, press [6 (MIXER)] to access this screen.
Use the cursor buttons to select the parameter that you want to edit, and use the
VALUE dial or [DEC] [INC] to set the value.
The [2]–[7] buttons located below the screen provide access to the editing screens
indicated in the bottom line of the screen.
When you’ve finished editing, press [EXIT] to return to the PERFORM PLAY screen.
When you’re playing back a song from an external MIDI device connected to the JUNO-STAGE, you may wish to silence (mute) the playback of
specific parts.
For example, you can mute the melody and use the remainder of the song for karaoke or for practicing that part yourself.
1. In the PART MIXER screen, press [7 (MUTE)].
The Part Mute window will open.
2. Use [ ] [ ] to select a part.
3.
Use the VALUE dial, [DEC] [INC], or [ ] [ ] to turn muting
“ON” or “OFF.”
Parts whose mute setting is “ON” will not produce sound.
You can also use the following function buttons to turn the mute
setting on/off.
• Pressing [4 (1-2 ON)] will turn part 1 and part 2 on.
• Pressing [5 (10 ON)] will turn part 10 on.
• Pressing [6 (ALL OFF)] will turn all parts off.
4. Press [7 (CLOSE)].
The Part Mute window will close.
Part muting does not turn off the part’s MIDI reception switch;
rather, it silences the part by minimizing its volume. This means
that MIDI messages are being received by the part.
Adjusting Sound Settings Such as Volume or Pan (PART MIXER)
Button Content
[2 (LV&PAN)]
Part volume (Level, p. 140) and PAN (left/right position) (Pan, p. 140)
[3 (CHO&REV)]
Level of the signal sent from each part to chorus (Chorus, p. 141) and to reverb (Reverb, p. 141)
[4 (FILTER)]
Each part’s cutoff (Cutoff, p. 142) and resonance (Reso, p. 142) settings
[5 (KEY/OUT)]
KEY
Pitch of each part (semitone steps, ±4 octaves) (Coarse, p. 141)
KBD
Keyboard switch (p. 134)
RHY
Specifies the part that will play the rhythm pattern.
ARP
Arpeggio part (p. 61)
OUT
Output assign (Asgn, p. 141)
[7 (MUTE)]
Opens the Part Mute window, where you can silence (mute) specific parts.
Silencing Specific Parts (Mute)
Part Name Patch Namber/Name
JUNO-STAGE_e.book 139 ページ ２００８年１０月１７日 金曜日 午後１２時２７分