Roland GT-8 Owner'S Manual Download Page 1

Page: 1 / 108

Owner’s Manual

G6047002R3

‘04-10-1

■

Printing Conventions in This Manual

• Text or numerals enclosed in square brackets [ ] indicate buttons.

[WRITE]

WRITE button

[SYSTEM]

SYSTEM button

•

EXP pedal

is an abbreviation of “expression pedal.”

• Reference such as (p. **) indicate pages in this manual to which you can refer.

* All product names mentioned in this document are trademarks or registered

trademarks of their respective owners.

Thank you, and congratulations on your choice of the BOSS

GT-8

Guitar Effects Processor.

Before using this unit, carefully read the sections entitled:

• USING THE UNIT SAFELY (page 2–3)

• IMPORTANT NOTES (page 4)

These sections provide important information concerning the proper
operation of the unit.

Additionally, in order to feel assured that you have gained a good grasp of
every feature provided by your new unit, Owner’s manual should be read in
its entirety. The manual should be saved and kept on hand as a convenient
reference.

All rights reserved. No part of this publication may be reproduced in any form without the written
permission of BOSS CORPORATION.

Summary of Contents for GT-8













































































































Search results

Summary of Contents for GT-8

Reviews:

Related manuals for GT-8

Brands by name

Popular brands

Roland GT-8, Owner'S Manual

Search results

Summary of Contents for GT-8

Reviews:

Related manuals for GT-8

Brands by name

Popular brands