Roland Fantom XR, Owner'S Manual

Page: 209 / 284

209
Effects List
56: LOFI NOISE
In addition to a lo-fi effect, this adds various types of noise such as
white noise and disc noise.
fig.MFX-56
57: LOFI COMPRESS
This is an effect that intentionally degrades the sound quality for
creative purposes.
fig.MFX-57
58: LOFI RADIO
In addition to a Lo-Fi effect, this effect also generates radio noise.
fig.MFX-58
Wow/Flutter
Rate 0–127 Speed of wow/flutter (complex variation
in pitch caused by tape wear and rotational
irregularity)
Wow/Flutter
Depth 0–127 Depth of wow/flutter
Echo Level # 0–127 Volume of the echo sound
Direct Level # 0–127 Volume of the original sound
Level 0–127 Output level
Parameter Value Description
LoFi Type 1–9 Degrades the sound quality. The sound qual-
ity grows poorer as this value is increased.
Filter Type OFF, LPF,
HPF Type of filter
OFF:
no filter is used
LPF:
cuts the frequency range above the
Cutoff
HPF:
cuts the frequency range below
the Cutoff
Filter Cutoff 200–8000 Hz Center frequency of the filter
W/P Noise
Type WHITE, PINK Switch between white noise and pink
noise.
W/P Noise
LPF 200–8000 Hz,
BYPASS Center frequency of the low pass filter applied
to the white/pink noise (BYPASS: no cut)
W/P Noise
Level # 0–127 Volume of the white/pink noise
Disc Noise
Type LP, EP, SP,
RND Type of record noise
The frequency at which the noise is
heard depends on the selected type.
Disc Noise
LPF 200–8000 Hz,
BYPASS Adjusts the cutoff frequency of the low
pass filter applied to the record noise. If
you don’t want to filter out any high fre-
quencies, set this parameter to BYPASS.
Disc Noise
Level # 0–127 Volume of the record noise
Hum Noise
Type 50 Hz, 60 Hz Frequency of the hum noise
Hum Noise
LPF 200–8000 Hz,
BYPASS Center frequency of the low pass filter ap-
plied to the hum noise (BYPASS: no cut)
Hum Noise
Level # 0–127 Volume of the hum noise
Low Gain -15– +15 dB Gain of the low range
High Gain -15– +15 dB Gain of the high range
Balance # D100:0W–
D0:100W Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
Parameter Value Description
R in
R out
L in
L out
Lo-Fi
Lo-Fi
Noise Gen.
2-Band
EQ
2-Band
EQ
Parameter Value Description
Pre Fil Type 1–6 Selects the type of filter applied to the
sound before it passes through the Lo-Fi ef-
fect.
LoFi Type 1–9 Degrades the sound quality. The sound
quality grows poorer as this value is in-
creased.
Post Fil Type OFF, LPF, HPF Type of filter
OFF:
no filter is used
LPF:
cuts the frequency range above the
Cutoff
HPF:
cuts the frequency range below
the Cutoff
Post Fil Cutoff 200–8000 Hz Basic frequency of the Post Filter
Low Gain -15– +15 dB Gain of the low range
High Gain -15– +15 dB Gain of the high range
Balance # D100:0W–
D0:100W Volume balance between the direct sound
(D) and the effect sound (W)
Level # 0–127 Output level
Parameter Value Description
LoFi Type 1–9 Degrades the sound quality. The sound
quality grows poorer as this value is in-
creased.
Filter Type OFF, LPF,
HPF Type of filter
OFF: no filter is used
LPF: cuts the frequency range above the
Cutoff
HPF: cuts the frequency range below
the Cutoff
Filter Cutoff 200–8000 Hz Basic frequency of the Post Filter
Radio
Detune # 0–127 Simulates the tuning noise of a radio. As
this value is raised, the tuning drifts fur-
ther.
Radio Noise
Level # 0–127 Volume of the radio noise
Balance # D100:0W–
D0:100W Volume balance between the direct sound
(D) and the effect sound (W)
Level 0–127 Output level
L in
R in
L out
R out
Compressor
Lo-Fi
Lo-Fi
Compressor
2-Band
EQ
2-Band
EQ
R in
R out
L in
L out
Lo-Fi
Lo-Fi
Radio
2-Band
EQ
2-Band
EQ
Fantom-XR_r_e.book 209 ページ ２００６年４月４日 火曜日 午前１０時１４分