manualshive.com logo in svg

Rohde & Schwarz ZND, Getting Started

Share
Download
Rohde & Schwarz ZND Getting Started Download Page 3

Contents

R&S

®

ZND

3

Getting Started 1316.2407.02 ─ 62

Contents

1 Safety and regulatory information........................................................7

1.1

Safety instructions........................................................................................................7

1.2

Warning messages in the documentation.................................................................. 9

1.3

Korea certification class A......................................................................................... 10

2 Documentation overview.....................................................................11

2.1

Getting started manual............................................................................................... 11

2.2

User manual and help................................................................................................. 11

2.3

Service manual............................................................................................................ 11

2.4

Instrument security procedures................................................................................ 12

2.5

Printed safety instructions.........................................................................................12

2.6

Data sheets and brochures........................................................................................ 12

2.7

Release notes and open source acknowledgment (OSA).......................................12

2.8

Application notes, application cards, white papers, etc......................................... 12

3 Preparing for use................................................................................. 13

3.1

Lifting and carrying.....................................................................................................13

3.2

Unpacking and checking............................................................................................13

3.3

Choosing the operating site.......................................................................................13

3.4

Setting up the product................................................................................................14

3.4.1

Placing the product on a bench top...............................................................................14

3.4.2

Mounting the product in a rack......................................................................................15

3.5

Considerations for test setup.................................................................................... 16

3.6

Connecting the analyzer to the AC supply............................................................... 17

3.7

Switching the instrument on and off.........................................................................17

3.8

Standby and ready state.............................................................................................18

3.9

Windows operating system........................................................................................18

3.10

Minimizing the VNA application.................................................................................20

3.11

Connecting external accessories.............................................................................. 20

3.11.1

Connecting a monitor.................................................................................................... 21

3.11.2

Connecting a keyboard................................................................................................. 21

3.11.3

Connecting a mouse..................................................................................................... 21

3.11.4

Connecting a printer......................................................................................................22

Summary of Contents for ZND









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands