Preparing for use
R&S
®
ZND
15
Getting Started 1316.2407.02 ─ 62
Left
= Stacked correctly, same dimensions
Middle = Stacked correctly, different dimensions
Right = Stacked incorrectly, too many products
4.
NOTICE!
Overheating can damage the product.
Prevent overheating as follows:
● Keep a minimum distance of 10
cm between the fan openings of the product
and any object in the vicinity.
● Do not place the product next to heat-generating equipment such as radiators
or other products.
3.4.2
Mounting the product in a rack
To prepare the rack
1. Observe the requirements and instructions in
2.
NOTICE!
Insufficient airflow can cause overheating and damage the product.
Design and implement an efficient ventilation concept for the rack.
To mount the R&S
ZND in a rack
1. Use an adapter kit to prepare the R&S
ZND for rack mounting.
a) Order the rack adapter kit R&S
ZZA-KN5 (order number 1175.3040.00).
b) Mount the adapter kit. Follow the assembly instructions provided with the
adapter kit.
2. Lift the R&S
ZND to shelf height.
3. Grab the handles and push the R&S
ZND onto the shelf until the rack brackets fit
closely to the rack.
4. Tighten all screws in the rack brackets with a tightening torque of 1.2
Nm to secure
the R&S
ZND in the rack.
To unmount the R&S
ZND from a rack
1. Loosen the screws at the rack brackets.
2. Remove the R&S
ZND from the rack.
3. If placing the R&S
ZND on a bench top again, unmount the adapter kit from the
R&S
ZND. Follow the instructions provided with the adapter kit.
Setting up the product
