Rohde & Schwarz DVMS4, Getting Started

Page: 53 / 58

Installed Software
R&S
®
DVMS4
47 Getting Started 2113.7625.02 ─ 10
(1) = Header showing instrument type
(2) = Header showing instrument name
(3) = Free memory space on backup partition
(4) = List of backups already created
(5) = Description of currently selected backup
To continue, see one of the following chapters:
●
Chapter 8.3.2.1, "Creating a Backup" , on page 47
●
Chapter 8.3.2.2, "Restoring a Selected Backup Version" , on page 48
●
Chapter 8.3.2.3, "Deleting a Backup" , on page 48
8.3.2.1 Creating a Backup
Using this function, you can create a backup of the current instrument installation and
its configuration.
1. In the main dialog (see Figure 8-1 ), select "Create Backup".
The "Create Backup" dialog is displayed. Under "Description", the current version
of the firmware is displayed.
2. Enter a name for the backup and the date. If necessary, you can add information to
the description.
3. Select "Start Backup".
During the backup process, a progress information dialog is displayed. You can ter-
minate at any time ("Cancel").
After the process has been finished, the dialog is closed automatically, and the
main dialog is displayed again.
Note: If you activate "Keep open when finished", the progress information dialog
remains open until you close it.
4. In the main dialog, select "Exit and Reboot".
The backup and restore application is closed, and the R&S DVMS is restarted.
Backup and Restore of the System Partition