Switching On or Off the Instrument
R&S
®
DVMS4
27
Getting Started 2113.7625.02 ─ 10
5.2
Switching Off the Instrument
Risk of losing data
If you switch off the running instrument by disconnecting the power cord before shut-
ting it down, the instrument loses its current settings. Furthermore, program data can
be lost.
Always shut down the R&S
DVMS first.
To switch off the R&S
DVMS
1. Check the status displays on the front panel of the R&S
DVMS. If the [REMOTE]
status display on the front panel is on, do not switch off the R&S
DVMS. Someone
else is using the R&S
DVMS by remote operation (see also
2. Shut down the R&S
DVMS.
The R&S
DVMS stores the current configuration settings automatically.
The R&S
DVMS starts booting again.
3. When the front panel display shows the boot screen, disconnect the R&S
DVMS
from the AC power supply.
All LEDs on the front panel go out.
5.3
Checking the Provided Software Options
The R&S
DVMS can be equipped with software options. To check whether the installed
options correspond to the options indicated on the delivery note, proceed as follows.
1. In the "Help" menu, select "Option Management".
A list with the software options is displayed.
2. Check the options enabled via license keys as indicated in the delivery note.
► Check the availability of the hardware options as indicated in the delivery note.
For an overview of the all options available for the R&S
DVMS, see the Rohde
&
Schwarz homepage (
www.rohde-schwarz.com/product/dvms
Checking the Provided Software Options
