Sample Application
R&S
®
DVMS4
28
Getting Started 2113.7625.02 ─ 10
6
Sample Application
Follow the instructions in this chapter to perform your first measurement with the
R&S
DVMS.
For an expanded selection of measurement examples and background information,
refer to the user manual or the help system.
In this measurement, the R&S
DVMS is used for basic compliance checks of one sin-
gle MPEG2 transport stream (TS) signal.
Since the R&S
DVMS base unit provides 4 baseband transport stream inputs (TS
IN/OUT 1...4, see
Chapter 3.2.4.1, "TS IN/OUT 1 ... 4"
the described measurement with every R&S
DVMS independently of the number of
installed modules.
6.1
Requirements
The DVB TS
‑
ASI input signal used in this measurement is generated by either a TS
generator (i.e. R&S
DVSG) or by any other DVB-compliant TS
‑
ASI source.
The R&S
DVMS is locally operated by using an LCD monitor (DVI input required, at
least 1024
x
768 pixels) and a USB mouse.
6.2
Setting Up the R&S
DVMS
The required connectors are on the rear panel of the R&S
DVMS. For details on the
Chapter 3, "Interfaces and Connectors"
1. Connect the TS ASI output of the TS generator to the TS IN/OUT 2 baseband input
(BNC connector) of the R&S
DVMS base unit.
2. Plug the USB connector of the USB mouse in one of the two USB interfaces.
3. Switch on the R&S
DVMS and wait until the TS analyzer monitoring application is
running.
The application window showing the default start screen is displayed.
6.3
Creating a Basic Configuration
In the TS analyzer monitoring application, create the basic configuration.
1. In the toolbar, select "Instrument Configuration" to open the "Instrument Configura-
tion" dialog.
Creating a Basic Configuration
