Sample Application
R&S
®
DVMS4
31
Getting Started 2113.7625.02 ─ 10
3. Read the current bit rate of the connected TS from the TS elements table.
The value is given in units of megabits per second (Mbit/s). The value shown is the
gross value of all transport stream packets per second, including TS packet header
and TS packet payload.
6.5.2
Checking the Net Bit Rate of the Connected TS
To check the net bit rate value of the TS, you have to change the calculation method
for the TS bit rate measurement from gross to net values.
1. In the toolbar, select "Monitoring Configuration".
2. Select the "Extended Checks I" tab.
On this tab, you can see all settings for bit rate measurements.
Performing the Measurement
