Rohde & Schwarz 1322.8003K08, Getting Started

Page: 84 / 106

Operating the Instrument
R&S
®
FSWP
84 Getting Started 1177.5756.02 ─ 13
Message Meaning
RF OVLD Overload of the input mixer or of the analog IF path.
Reduce the input level.
UNCAL One of the following conditions applies:
●
Correction data has been switched off.
●
No correction values are available, for example after a firmware update.
●
Record the correction data by performing a self alignment
WRONG_FW The firmware version is out-of-date and does not support the currently
installed hardware. Until the firmware version is updated, this error mes-
sage is displayed and self-alignment fails.
(For details refer to the R&S
FSWP User Manual).
6.2 Accessing Functions
All tasks necessary to operate the instrument can be performed using the user
interface. Apart from instrument specific keys, all other keys that correspond to an
external keyboard (for example arrow keys, [Enter] key) operate conform to
Microsoft.
For most tasks, there are at least 2 alternative methods to perform them:
●
Using the touchscreen
●
Using other elements provided by the front panel, for example the keypad,
rotary knob, or arrow and position keys.
The measurement and instrument functions and settings can be accessed by
selecting one of the following elements:
●
System and function keys on the front panel of the instrument
●
Softkeys on the touchscreen
●
Context menus for specific elements on the touchscreen
●
Icons on the tool bar in the touchscreen
●
Displayed setting on the touchscreen
● Toolbar ............................................................................................................ 85
● Softkeys .......................................................................................................... 86
● Context Menus ................................................................................................ 87
● On-screen Keyboard ....................................................................................... 87
Accessing Functions