Trying Out the Instrument
R&S
®
FSWP
73
Getting Started 1177.5756.02 ─ 13
The R&S
FSWP can provide both, when you set it up that way.
1. Enter the "Overview" dialog box and, from there, enter the "Output" dialog
box.
2. Select the "DC Config" tab.
There you have the following options:
● Turn each of the three DC outputs on or off.
● Define the supplied voltage (or current in case of the V
supply
output).
● Define limits for the outputs. When you define limits, the supplied voltage
will not go below or above these.
For more information on configuring DC outputs, refer to the R&S
FSWP user
manual.
3. Turn on the output of voltage or current with the "DC Power" feature.
Tip:
You can turn the output on and off easily with the "DC On / Off" button in
the toolbar. The "DC Config" button provides access to a softkey menu that
lets you define the signal characteristics without entering a dialog box.
Measurement Configuration
