Rohde & Schwarz 1322.8003K08, Getting Started

Page: 21 / 106

Preparing for Use
R&S
®
FSWP
21 Getting Started 1177.5756.02 ─ 13
3.6 Switching the Instrument On and Off
Table 3-1: Overview of power states
Status LED on Power key Position of main power switch
Off
gray
[0]
Standby
orange
[I]
Ready
green
[I]
To switch on the R&S FSWP
The R&S FSWP is off but connected to power.
1. Set the switch on the power supply to position [I].
See Chapter 4.2.2, "AC Power Supply Connection and Main Power Switch" ,
on page 46.
The LED of the Power key is orange.
See
Chapter 4.1.2, "Power Key" , on page 35.
2. Press the Power key.
See Table 3-1 .
The LED changes to green.
The R&S
FSWP boots.
After booting, the instrument is ready for operation.
Warm-up time for OCXO
When the instrument is switched on, the OCXO requires an extended warm-
up time (see data sheet).
To shut down the product
The product is in the ready state.
► Press the [Power] key.
The operating system shuts down. The LED changes to orange.
If the instrument temperature exceeds the limit specified in the data sheet,
the R&S
FSWP automatically shuts down to protect the instrument from
damage.
Switching the Instrument On and Off