Functional description of PRxx1 series controllers Rev.H.doc
2016-10-28
43/43
LED SYSTEM
Orange
The LED is continuously on when system malfunction
is detected and the controller stops operating until all
problems are solved. The LED blinks if the controller
awaits for the complete command.
3.4.2 Acoustic signals
All PRxx1 series controllers (except for PR411DR) generate acoustic signals by means of internal
speakers as well as by speakers of external PRT series readers. The PR411DR controller is not
equipped with internal buzzer, it generates acoustic signals via buzzers located in the external PRT
series readers.
Table 14. Acoustic signals
Type
Description
Single short signal (1 x BEEP)
Card read or key pressed.
Double short signals (2 x BEEP)
Prompt signal, command accepted but system awaits for
further steps.
Triple short signals (3 x BEEP)
OK signal. Command entered correctly or access granted.
Single long signal
Error or unknown card/PIN
Double long signal
Correct card/PIN however access denied due to the other
rules.
Periodic long signal
Settings failure. Memory Reset is necessary (see 3.1 Memory
Reset – Setting MASTER identifier and ID address of the
controller)
This symbol placed on a product or packaging indicates that the
product should not be disposed of with other wastes as this may
have a negative impact on the environment and health. The user
is obliged to deliver equipment to the designated collection points
of electric and electronic waste. For detailed information on
recycling, contact your local authorities, waste disposal company
or point of purchase. Separate collection and recycling of this type
of waste contributes to the protection of the natural resources
and is safe to health and the environment. Weight of the
equipment is specified in the document.
Contact:
Roger sp. z o.o. sp.k.
82-400 Sztum
Gościszewo 59
Tel.: +48 55 272 0132
Fax: +48 55 272 0133
Tech. support: +48 55 267 0126
Web:
