Rockwell Automation SLC 500 Thermocouple Selection Manual Download Page 24

Page: 24 / 92

Publication 1747-SG001D-EN-P — January 2009

Thermocouple Temperature Ranges

Input

Temperature Range for All Modules

Accuracy Max. Error at +25 °C (+77 °F)

°C

°F

1746-NT4

1746-NT8

1746-INT4

-210…760 °C

-346…1400 °F

±1.06 °C (±1.91 °F)

±1.4 °C (±2.52 °F)

±1.6 °C (±2.88 °F)

-270…1370 °C

-454…2498 °F

±1.72 °C (±3.10 °F)

±1.5 °C (±2.7 °F)

±3.8 °C (±6.84 °F)

-270…400 °C

-454…752 °F

±1.43 °C (±2.57 °F)

±1.3 °C (±2.34 °F)

±2.05 °C (±3.69 °F)

-300…1820 °C

-572…3308 °F

±0.73 °C (±1.3 °F)

±1.0 °C (±1.8 °F)

±2.4 °C (±4.32 °F)

-270…1000 °C

-454…1832 °F

±1.39 °C (±2.5 °F)

±1.3 °C (±2.34 °F)

±1.79 °C (±3.23 °F)

0…1768 °C

32…3214 °F

±3.59 °C (±6.46 °F)

±3.6 °C (±6.48 °F)

±2.23 °C (±4.02 °F)

0…1768 °C

32…3214 °F

±3.61 °C (±6.5 °F)

±3.4 °C (±6.12 °F)

±2.38 °C (±4.29 °F)

0…1300 °C

32…2372 °F

±3.12 °C (±5.62 °F)

±2.7 °C (±4.86 °F)

±3.83 °C (±6.90 °F)

✶

0…2317 °C

32…4201 °F

N/A

±2.38 °C (±4.11 °F)

✶

0…2317 °C

32…4201 °F

N/A

±2.52 °C (±4.54 °F)

CJC Sensor 0…85 °C

32…185 °F

N/A

✶

Thermocouple type only available with 1746-INT4 module.

DC Millivolt Input Ranges for 1746-NT4, 1746-NT8, and 1746-INT4 Modules

Input Type

Range

Accuracy at 25 °C (77 °F)

±50 mV

-50 mV dc…+50 mV dc

±100 mV

-100 mV dc…+100 mV dc

RTD Input Modules

The RTD modules interface with platinum, nickel, copper, and nickel-iron RTDs, and with variable resistance devices such as
potentiometers (0 to 3000

maximum). The module provides on-board RTD temperature scaling in degrees Celsius and degrees

Fahrenheit or resistance scaling in ohms.

TIP:

Block transfers are required in a remote I/O configuration, using a 1747-ASB with a PLC.

www.aotewell.com

www.fa-market.com

[email protected]

AoteWell International.inc

[email protected]

Tel: +852-6563-2160

Summary of Contents for SLC 500 Thermocouple





























































































Search results

Summary of Contents for SLC 500 Thermocouple

Reviews:

Related manuals for SLC 500 Thermocouple

Brands by name

Popular brands

Rockwell Automation SLC 500 Thermocouple, Selection Manual

Search results

Summary of Contents for SLC 500 Thermocouple

Reviews:

Related manuals for SLC 500 Thermocouple

Brands by name

Popular brands