Rockwell Automation SLC 500 Thermocouple Selection Manual Download Page 39 | Manualshive

Page: 39 / 92

background image

39

Publication 1747-SG001D-EN-P — January 2009

Selecting Network
Communications

Step 2 - Select:

networks

communication modules

appropriate communication cables

Rockwell Automation offers many control and communications media products to
help you integrate plant operations. The SLC 500 family features communications
modules and devices which provide support for different networks, including EtherNet/IP,
ControlNet, DeviceNet, DH+, DH-485, Universal Remote I/O and serial networks.

NetLinx Open
Network Architecture

NetLinx Open Network Architecture is the Rockwell Automation strategy of using open
networking technology for seamless, top-floor to shop-floor integration. The NetLinx-
based networks – DeviceNet, ControlNet, and EtherNet/IP – all use the Common
Industrial Protocol (CIP), so they speak a common language and share a universal set
of communication services. NetLinx architecture, part of the Integrated Architecture,
seamlessly integrates all the components in an automation system from a few devices on
one network to multiple devices on multiple networks including access to the Internet
– helping you to improve flexibility, reduce installation costs, and increase productivity.

The EtherNet/IP network is an open industrial-networking standard that supports
implicit and explicit messaging and uses commercial, off-the-shelf Ethernet
equipment and physical media.

The ControlNet network allows intelligent, high-speed control devices to share the
information required for supervisory control, work-cell coordination, operator
interface, remote device configuration, programming, and troubleshooting.

The DeviceNet network offers low-cost, high-speed access to plant-floor data from a
broad range of plant-floor devices and a significant reduction in wiring.

www.aotewell.com

www.fa-market.com

[email protected]

AoteWell International.inc

[email protected]

Tel: +852-6563-2160

«
...
37
38
39
40
41
...
»

Summary of Contents for SLC 500 Thermocouple





























































































Reviews:

No comments

Related manuals for SLC 500 Thermocouple

GRAVIMETRIC AUGER FEEDER MGF-ST

Brand: Maguire Products Pages: 47

Brand: Magtrol Pages: 160

disklavier DKC-850

Brand: Yamaha Pages: 2

Brand: Balboa Water Group Pages: 88

Brand: ABB Pages: 2

Brand: SYCLOPE electronic Pages: 40

Brand: Timotion Pages: 10

Brand: Cypress Pages: 3

IB-TRON 4000 SOL

Brand: INSBUD Pages: 14

Brand: babyplus Pages: 28

Brand: Automated Logic Pages: 10

Brand: Texas Instruments Pages: 25

Brand: Xantech Pages: 7

Brand: Chipolino Pages: 12

Brand: Chamberlain Pages: 1

Brand: Grundfos Pages: 23

Brand: Idesco Pages: 7

Latherm HZR Comfort

Brand: LAMBERTI ELEKTRONIK Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands